Autonet K6860631 Instruction Manual - Page 2

Browse online or download pdf Instruction Manual for Network Router Autonet K6860631. Autonet K6860631 4 pages. Autonet wifi router instruction manual

Print Page

6. Secure the Wi-Fi Router under the passenger seat (1)

with the supplied tie straps and Velcro® tape (3).

7. Connect the power harness connector (2) to the Wi-Fi

router.

NOTE: Do not use the power outlet for the power supply to the Wi-Fi router.

8. Locate the keyed power outlet wiring harness.

9. Cut each wire and remove 13 mm (0.5 in.) of insula-

tion from each wire that needs to be soldered/spliced.

10. Place a piece of supplied adhesive lined heat shrink

tubing on one side of each cut wire. Insure the tubing

will be long enough to cover and seal the entire sol-

dered area.

CAUTION: Do not use acid core solder.

11. Solder the supplied fused pigtail to Wi-Fi power har-

ness power wire.

12. Place the strands of the power side wires overlapping

each other inside of the splice clip (1 ) along with the

red fuse holder wire(2).

March 24, 2009

K6860631 Rev. 1