iHealth BG5 Owner's Manual - Page 11

Browse online or download pdf Owner's Manual for Blood Glucose Meter iHealth BG5. iHealth BG5 16 pages. Wireless smart gluco-monitoring system
Also for iHealth BG5: Quick Start Manual (13 pages), Quick Start Manual (2 pages), Quick Start Manual (7 pages)

Print Page

Online measurement mode：(with iOS device)

Press and hold the Memory Button for 3

seconds to turn the meter on. Enable the

Bluetooth function on your iOS device.

When the "

" symbol appears, the meter

is in Bluetooth communication mode.

You may perform a test even when the

meter is not connected to your iOS device

via Bluetooth, and the meter will save up to

500 test results. launch the App and follow the on-screen

instructions. Test results will be transmitted to the App with

date and time. If the Bluetooth function disconnected, the

meter will automatically shut off.

REFERENCE VALUE OF THE IHEALTH WIRELESS SMART

GLUCOSE METER

Time of day

Fasting and before meals

2 hours after meals

Source: (1) American Diabetes Association: Diagnosis and

Classiﬁcation of Diabetes Mellitus (Position Statement).

Diabetes Care 34 (Supp. 1) S66, 2011.

(2) Tietz Fundamentals of Clinical Chemistry, 6th Edition,

Edited by Burtis CA and Ashwood ED, W. B. Saunders Co.,

Philadelphia, PA, 2008, p. 849.

Please consult your healthcare provider to determine a

target range that is best for you.

COMPARING GLUCOSE METER TEST RESULTS WITH

LABORATORY RESULTS

The Wireless Smart Glucose Meter provides you with whole

blood equivalent results. The result you obtain from your

People without diabetes

<110 mg/dL

<140 mg/dL

glucose meter may differ somewhat from your laboratory

results due to normal variation. The Wireless Smart Glucose

Meter results can be affected by factors and conditions that

do not affect laboratory results in the same way. To make an

accurate comparison between the Wireless Smart Glucose

Meter and laboratory results, follow the guidelines below.

Before Going to the Lab

• Perform a Control Solution test to make sure that the meter

is working properly.

• If possible, fast for at least eight hours before conducting a

comparison test.

• Take your Wireless Smart Glucose Meter with you to the lab.

While at the Lab

Make sure that samples for both tests are taken and tested

within 15 minutes of each other.

• Wash your hands before obtaining a blood sample.

• Never use your glucose meter with blood samples

collected in a test tube.

• Use fresh capillary blood only.

CLEANING AND DISINFECTION

The cleaning and disinfection is absolutely necessary for the

test procedure, because cleaning can insure the meter works

well (for example, display will be clear to see after cleaning);

and disinfection can avoid the infection to you or to the

other people, and the cross-infection.

We strongly warn that the protective cover is needed when

use the iOS device to test the blood glucose , the meter and

lancing device should be cleaned and disinfected following

use. And we suggest you use the following product:

CaviWipes (EPA registration number ：46781-8).

The CaviWipes, with Isopropanol and Diisobutyl-phenoxy-