Autool BT-660 User Manual - Page 2
Browse online or download pdf User Manual for Test Equipment Autool BT-660. Autool BT-660 5 pages. Battery system tester
Also for Autool BT-660: User Manual (9 pages)
Print Page
Trademark
AUTOOL Technology Co, Ltd. has registered its trademarks in
several countries including China, the trademark is
regard to the other trademark, service logo, domain name, icon
and company name mentioned in this manual, they shall all
belong to AUTOOL and its other affiliated company, in other
countries without the registration yet of these trademark, service
logo, domain name, icon and company name of AUTOOL, here
we announce they are owned by AUTOOL. Any company or
person shall not use the trademark, service logo, domain name,
icon and company name of AUTOOL before getting approved by
AUTOOL with written certificates. Please visit our website
www.autooltech.com or email to [email protected] to
contact us.
Product Introduction
Battery Conductance Tester BT-660 adopt currently the world's
most advanced conductance testing technology to easily, quickly
and accurately measure the actual cold cranking amps capability
of the vehicle starting battery, healthy state of the battery itself,
and common fault of the vehicle starting system and charging
system, which can help maintenance personnel to find the
problem quickly and accurately, thus to achieve quick vehicle
repair.
Product specification
•
One year warranty and lifetime maintenance.
•
Application: 12V automotive cranking lead acid battery and
12V/24V car system test
. With
1
•
Measure Range:
CCA
100-3000
BCI
100-3000
CA
100-3000
MCA
100-3000
JIS
26A17-245H52
•
Working Environment Temp:-12℃-50℃.
•
Special test clip: Double conductance Kelvin clamp.
•
Housing Material: Acid-resistant ABS plastic.
•
Measure Range: 30AH-200AH.
•
Voltage Measure Range: 7-30VDC.
How to use
•
Connect the red test clamp with battery anode and the black one
with cathode, the tester will power on automatically . Voltage
battery below 7.0VDC can't be tested properly , then press OK
key to continue.
•
According to the tester, you can press UP/DOWN key to choose:
① Battery Test
② Cranking Test
③ Charging Test
Battery Test
Select the battery test and press OK key to continue:
•
Battery Type: select your battery type, usually is "Regular Flood".
•
Input testing standard: the standard which you can see the front
of the battery, such as CCA/BCI/DIN. If you can't find any info
about the standard, you can choose GB standard. Choose GB
standards would lead little tolerance.
DIN
100-2500
IEC
100-2500
EN
100-2500
SAE
100-3000
GB
30AH-220AH
④ Review Data
⑤ Print Data
⑥ Export Data to Computer
2