AutoPets Feeder-Robot Instruction Manual - Page 8
Browse online or download pdf Instruction Manual for Pet Care Product AutoPets Feeder-Robot. AutoPets Feeder-Robot 19 pages.
Print Page
hand-wash with mild soap the following removable parts:
the Hopper, Hopper Insert, the Hopper Lid (underside only),
the Dispenser, the Dispenser Flap, and the Food Bowl(s).
3.
Optional: Hand-wipe non-removable parts that touch pet food: The
Food Chute, the Food Bowl Holder, and the Status Indicator Tower.
Do NOT submerge the Feeder-Robot Base or Control Panel in water.
4.
Let all parts air dry completely before reassembling the
Feeder-Robot.
Placement
Place the Feeder-Robot in the same location as the previous
feeding device (at least during transition).
Make sure the unit is on a level surface. It can be placed on hard
flooring or carpet, as long as it is level.
Locate the unit near a power outlet (cord is 6 feet long).
Do not place or store the Feeder-Robot where it can fall or be
pulled into a tub or sink.
To avoid tripping, always position power cord out of the way of
foot traffic.
Do NOT use outdoors. FOR INDOOR HOUSEHOLD USE ONLY.
Plug It In
Note: Plug in the Feeder-Robot BEFORE adding
food to the Hopper.
1.
Install the small plug end of the
power supply cord into the socket
underneath the unit (see image to
the right for location)
2.
Then plug the power supply into a
wall outlet.
877. 250.7729 | feeder-robot.com
14
Power Input
Add Food
1.
Remove the Hopper Lid by squeezing the Hopper Lid Release in the
center of the Hopper Lid (see page 8 for location). Use the built-in hook
on the underside of the Hopper Lid to hang it on the rear of the unit.
Hopper
Lid Hook
2.
Add food: With the Hopper Insert, you can add up to 25 cups of
kibble. Without the Hopper Insert, you can add 30-32 cups of kibble.
Make sure food is level. If you have small, round-shaped kibble, the
Hopper Insert may not be required.
Situate The Food Bowl
Important: The Food Bowl design is shaped like a wedge. Make sure
the narrow end of the Food Bowl is placed under the Food Ramp Lip
(see illustration below). If the Food Bowl is not aligned in this way, the
dispensed food may catch along the edge of the Food Bowl, preventing
it from filling properly.
Place Food Bowl
Under Food Ramp Lip
877. 250.7729 | feeder-robot.com
15
Fill Line