Galvin Engineering CliniLever TC51FC1C Installation Manuallines - Page 4

Browse online or download pdf Installation Manuallines for Bathroom Aid Galvin Engineering CliniLever TC51FC1C. Galvin Engineering CliniLever TC51FC1C 4 pages. Cp-bs hospital wall mixing set type 51 fixed 150 c/d

Print Page
Product Installation Guidelines
SERVICE AND MAINTENANCE
1.
Turn off the water supply and turn on the tap handle to drain water from the bodies.
2.
Remove the temperature indicator from the handle.
3.
Remove the handle from the tap.
4.
Unscrew the ceramic head part from the body.
5.
Check the o-ring on the ceramic head part for wear and damage. Replace if required.
6.
Clean the head part and the body of any debris.
7.
Replace the cartridge and hand tighten back into the body.
8.
Follow the product installation guidelines for the relevant product to re-assemble.
WARRANTY
The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering
Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or
implied. Galvin Engineering Pty. Ltd. hereby specifically disclaims all other warranties, express or implied,
including but not limited to the implied warranties of merchantability and fitness for a particular purpose.
Galvin Engineering Pty Ltd products are covered under our manufacturer's warranty available for download
from www.galvinengineering.com.au Galvin Engineering Pty Ltd expressly warrants that the product is free
from operational defects in workmanship and materials for the warranty period as shown on the schedule in
the manufacturer's warranty. During the warranty period, Galvin Engineering will replace or repair any
defective products manufactured by Galvin Engineering without charge, so long as the terms of the
Manufacturer's warranty are complied with.
The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy
for breach of warranty, and Galvin Engineering Pty Ltd shall not be responsible for any incidental, special or
consequential damages, including without limitation, lost profits or the cost of repairing or replacing other
property which is damaged if this product does not work properly, other costs resulting from labour charges,
delays, vandalism, negligence, fouling caused by foreign material, damage from adverse water conditions,
chemical, electrical or any other circumstances over which Galvin Engineering has no control. This warranty
shall be invalidated by any abuse, misuse, misapplication, improper installation or improper maintenance or
alteration of the product.
Version 3, 27 August 2021, Page 4 of 4
Version 2, 27 August 2021, 4 of 4