AFL FlexScan TS100 Quick Reference Manual - Page 10

Browse online or download pdf Quick Reference Manual for Tools AFL FlexScan TS100. AFL FlexScan TS100 19 pages. Optical troubleshooter

Print Page
AFL FlexScan TS100 Quick Reference Manual
Live PON Test
Test Sequence in Live PON Test
Press Start/Stop to check Live Fiber and allow the user to configure test setup
•
– Live Power levels measured and optionally compared against pass/fail limits
– Touch TS100 Tool icon to configure Test Settings or select OLS/OPM or Inspection
– Touch Launch Cable Length to edit LC length
– Touch Network Configuration to edit Network Type: Pt-to-Pt or FTTH PON and Split Ratio
– Press Start/Stop again to initiate a test
Touching [Press To Start] will also initiate a test
•
– Press Start/Stop to end a test
– Link Length, Loss, ORL detected and measured in 3-5 seconds
– Test continues to locate, identify and measure events
– Test completes within 30 seconds, identifying faults with loss or reflectance exceeding maximum allowed levels
Touch LinkMap to view LinkMap for most recent test
•
Press Home/Menu to select Save/Send or General Settings
•
9