AgSense Crop Link Lite Wiring Instructions - Page 8

Browse online or download pdf Wiring Instructions for Measuring Instruments AgSense Crop Link Lite. AgSense Crop Link Lite 12 pages. 2017-18 4-20ma inputs and scaled voltage inputs
Also for AgSense Crop Link Lite: Wiring Instructions (12 pages)

Print Page

Submersible Tank Level Sensor Wiring:

1. Install the White wire into the 12v Out terminal as shown above.

2. Install the Brown wire into the GND terminal as shown above

3. Install the Yellow wire into any input (AN1 to AN4) terminal as shown above.

4. Green wire is not used and can be capped off.

Note: DO NOT shorten or lengthen the cable on this transducer. This cable contains an air vent

tube and filter that is critical to this transducer functioning correctly – do not modify!!

Ashcroft KM45 series

Page 6