Maisi Smart Dashcam Quick Start Manual - Page 8
Browse online or download pdf Quick Start Manual for Dash Cameras Maisi Smart Dashcam. Maisi Smart Dashcam 16 pages.
Print Page
This refers to the sound when you press the button (on the camera), or the
sound when the camera is powered up or shut down. You can turn them on or
off. When beep sound is turned on, you can adjust the volume as well.
Language
You can choose the language from English, French, Spanish, Portuguese,
German, Italian, Simplified Chinese, Traditional Chinese, Russian, or
Japanese, etc.
TV Mode
For playback purpose, you can use the AV Out port (on the camera) to
connect the camera with your TV via a HDMI cable. Depending on your
country, choose either NTSC (National Television System Committee) or PAL
(Phase Alternate Line). Press REC to save changes.
Frequency
Choose the correct frequency to avoid flickering. In United Kingdom, 50 Hz is
widely used. However, in the United States, 60Hz is more common.
Screen Saver
This is usually used when you do not want the camera to distract your driving.
The screen turns off but the recording continues. You can set the camera to
turn off the screen after 3 minutes, 5 minutes, or 10 minutes. You can also
choose to turn off this function as well, depending on your needs; in this case,
the camera screen will remain on throughout the journey.
Lamp Setting / IR LED
This refers to the night vision LED in front of the camera. You can set it to on
or off.
Note: if the camera is in recording mode
(or Picture Mode
, see
below), you can press
to turn on/off the LED.
Exposure
Changing the exposure value will make sure your pictures/videos are always
correctly exposed. The bigger the value, the greater amount of light passes
through the lens, and, the smaller the value, the less amount of light. You
may set the exposure compensation to a higher value (i.e. +2.0) at nights and
a lower value during daytime (i.e. -2.0) to achieve better performance.
Page 7