AirFiltronix ES-7000 Assembly And Installation Instructions - Page 3

Browse online or download pdf Assembly And Installation Instructions for Air Cleaner AirFiltronix ES-7000. AirFiltronix ES-7000 4 pages. Mini-containment hood

Print Page

Figure 7

4. Tighten down both sides of the compression bar evenly with the wingnuts until the bar bends upward approximately

1/4 inch in the middle (see figure 7).

5. Re-install the motor housing on top of the filter mounting (see figure 8) base and retighten latches on either side of the

enclosure (see figure 9). On/Off switch should be facing the front of the unit.

6. Attach the power cord to the input connector on the top of the motor housing and connect to any suitable 110V

outlet (220V model is available to special order) (see figure 10).

Figure 9

Figure 11

7. Check for operation by turning power knob on in a clockwise direction.(see figure 11). Full blower speed is

achieved as soon as the knob passes the click position and the 'power on' light illuminates. Turning the knob fully clock

wise reduces blower speed to approx 30% of maximum for applications that do not require full power and lowers

noise level.

8. Fill out the filter history card(s), one for each type filter, (see figure 12) and place in clear pouch on the front of the

blower unit(s).

Figure 8

Figure 10

Figure 12