Adexa CH-09FLCD Instruction Manual - Page 11
Browse online or download pdf Instruction Manual for Heater Adexa CH-09FLCD. Adexa CH-09FLCD 16 pages.
Print Page
5. And then by pressing the
6. Under mode 1000W/13000W/2300W, pressing the
button to increase or decrease the temperaturesetting. It
starts to heat when the environment temperature below 2℃than
the setting temperature. It will stop heating as soon as reach the
setting temperature. The setting temperature range is 5-37℃.
7. Pressing
button to get heat directly.One time pressing is in
1000W setting, two time pressing is 1300W setting, three time
pressing is 2300W, and four time pressing is Prevent Frost
setting.
Prevent frost: after choosing this mode, icon is lighted,
environment temperature is 5℃, 1000W heating element works,
at the same time "1000W" icon light. When the environment is
4℃, 1300W heating element works, at the same time "1300W"
icon light. When the environment≤3℃,1000W and 1300W
heating elements work at the same time, "2300W" icon light.
When the environment ≥6℃, thermal fuse stops heating, icon
crush out, only prevent frost icon light.
8. By pressing
, you can set the timer from 1-24 hours.
9. By pressing
, could choose open or close fan, the fan icon
will be lighted on the screen when the fan is working. Only under
1000W/1300/2300W mode, could open or close the fan. Under
button to start the unit.
and