Gan Systems GS65011-EVBEZ User Manual - Page 9

Browse online or download pdf User Manual for Motherboard Gan Systems GS65011-EVBEZ. Gan Systems GS65011-EVBEZ 18 pages. Open loop boost evaluation board

Print Page

_____________________________________________________________________________________________________________________

Quick Start Guide

This chapter will guide the user through the evaluation board overview, hardware

operation, test setup and test results.

Evaluation Board Overview

The evaluation board contains:

• Connectors for both high voltage (0Vdc < V

power supplies

• Connector for the output load

• User-friendly probe connector and vias for V

verification

• The jumper for current sensing

The operating specifications of the evaluation board are as follows:

• The recommended input voltage operating range is 0 V < V

voltage is limited by the output voltage of Boost converter, which is further subject to

operating mode, the duty cycle and the load value.)

• Frequency of operation of 200 kHz - 900 kHz.

• The maximum load current depends on die temperature and is further subject to switching

frequency and operating voltage. Forced air cooling or heat sinking can increase current rating.

GSWPT-EVBEZ Rev190621

EZDrive

Please refer to the Evaluation Board/Kit Important Notice on page 15

Open Loop Boost Evaluation Board

< 200Vdc) and low voltage (5Vdc < V

, V

measurement and other performance

< 200 V. (The maximum input

GS65011-EVBEZ

User's Guide

< 12Vdc)