IKEA NUTID HGA4K Manual - Page 11

Browse online or download pdf Manual for Hob IKEA NUTID HGA4K. IKEA NUTID HGA4K 20 pages.
Also for IKEA NUTID HGA4K: Manual (15 pages)

Print Page

ENGLISH

- The connection of the hob to the gas

pipe network or gas cylinder must be

made by means of a rigid copper or

steel pipe with fittings complying with

local regulations, or by means of a

continuous-surface stainless steel hose

complying with local regulations. The

maximum length of the hose is 2 linear

metres.

- Connect elbow (A)* or (B)* supplied with

to the hob inlet main pipe and interpose

the washer (C) supplied, in compliance

with EN 549.

- Use elbow (A) for France and elbow (B)

- IMPORTANT: if a stainless steel hose

- After connection to the gas supply, check

Electrical connection

- This operation must be performed by a

- The electrical connections must comply

- The earthing of this appliance is

- Do not use an extension cord.

- IMPORTANT: the data relevant to the

Assembly

After having cleaned the perimeter surface,

apply the supplied gasket to the hob.

Position the hob in the worktop opening

made respecting the dimensions indicated

in the Instruction.

NOTE: the power supply cable must be long

enough to permit its upward extraction.

To secure the hob, use the brackets provided

with it. Fit the brackets into the relevant

bores shown by the arrow and fasten them

by means of their screws in accordance with

the thickness of the worktop.

for all other destinations.

is used, it must be installed so as not to

touch any mobile part of the furniture.

It must pass through an area where

there are no obstructions and where it is

possible to inspect it on all its length.

for leaks with soapy water. Light up the

burners and turn the knobs from max

position to minimum position

check flame stability

WARNING

qualified technician.

with local regulations.

compulsory by law.

voltage and power absorption are

indicated on the rating plate.

1 1

Earth

(yellow/green)