IKEA FINSMAKARE Manual - Page 17

Browse online or download pdf Manual for Ventilation Hood IKEA FINSMAKARE. IKEA FINSMAKARE 40 pages.
Also for IKEA FINSMAKARE: Manual (44 pages), User Manual (20 pages), Manual (36 pages), Manual (33 pages), Manual (44 pages), Manual (12 pages), Manual (25 pages), Manual (32 pages), Manual (40 pages), Manual (17 pages)

IKEA FINSMAKARE Manual
ENGLISH
The signal sounds at the end of the cooking
time.
7. Turn off the oven.
8. Empty the water tank after the steam
cooking is completed. Refer to the
cleaning function:Tank Emptying.
Caution! The oven is hot.
There is a risk of burns. Be
careful when you empty the
water tank.
9. After steam cooking steam can
condensate on the bottom of the cavity.
Always dry the bottom of the cavity when
the oven is cool.
Let the oven dry fully with the door open.
Warning! Wait a minimum of 60
minutes after each use of the
steam cooking in order to prevent
hot water from exiting the water
outlet valve.
Tank Empty indicator
The display shows: Water required and a
signal sounds when the tank is empty and
must be refilled.
For more information refer to "Daily use"
chapter, Setting a steam function.
Tank Full indicator
When the display shows: Water tank full, you
can use the steam cooking.
A signal sounds when the tank is full.
If you put too much water into
the tank, the safety outlet moves
the excess water to the bottom of
the oven.
Remove the water with a sponge
or cloth.
Emptying the water tank
Caution! Make sure that the oven
is cool before you start to empty
the water tank.
1. Prepare the draining pipe (C), included in
the same package with the user manual.
Put the connector (B) onto one of the
ends of the draining pipe.
A
B
C
2. Put the second end of the draining pipe
(C) into a container. Put it at a lower
position than the outlet valve (A).
3. Open the oven door and put the
connector (B) into the outlet valve (A).
4. Push the connector again and again
when you empty the water tank.
The tank can have some water
when the display shows:
Water required.
Wait until the water flow from
the water outlet valve stops.
5. Remove the connector from the valve
when the water stops flowing.
Do not use the drained water to
fill the water tank again.
Heat-up indicator
When you turn on a heating function, the
bar on the display comes on. The bar shows
that the temperature increases. When
temperature is reached the buzzer sounds 3
times and the bar flashes and then
disappears.
Fast Heat Up
This function decreases the heat-up time.
Do not put food in the oven when
the Fast heat up function works.
To turn on the function, hold
seconds. The heat-up indicator alternates.
17
for 3