IKEA IHW6530BS0 Use And Care Manual - Page 10

Browse online or download pdf Use And Care Manual for Ventilation Hood IKEA IHW6530BS0. IKEA IHW6530BS0 44 pages. 30" (76.2 cm) wall-mount canopy range hood

Print Page

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1. Disconnect

power.

2. Remove terminal box cover using a T10 Torx ®drive (or the

T10 adapter provided) to remove screws.

3. Remove the knockout in the terminal box and install a UL

listed or CSA approved 1/2"strain relief.

" //

///

A. Knockout

B. Terminalbox

C. Terminalbox cover

Run home power supply cable through strain relief, into

terminal box.

5. Use UL listed wire connectors

and connect black wires (C)

together.

6. Use UL listed wire connectors

and connect white wires (E)

together.

Electrical Shock Hazard

Electrically ground blower.

Connect ground

wire to green and yellow ground wire

in terminal

box.

Failure to do so can result

in death or electrical

shock.

7. Connect green (or bare) ground wire from home power supply

to yellow-green

ground wire (F) in terminal box using UL listed

wire connectors.

8. Tighten strain relief screw.

9. Install terminal box cover.

10. Check that all light bulbs are secure in their sockets.

11. Reconnect power.

When using both upper and lower vent covers, push lower cover

down onto hood and lift upper cover to ceiling. Install with 2 - 4.2

x 8 mm T20 ®screws using a T20 ®Torx ®drive (or T20 ® adapter

provided) to tighten.

NOTE: For vented installations, the upper vent cover may be

reversed to hide slots.

A. Home power supply cable

B. UL listed or CSA approved strain relief

C. Black wires

D. UL listed wire connectors

E. White wires

F. Green (or bare) and yellow-green ground wires

A. Bracket

B. 4.2 x 8 mm T20 ® screws

C. Vent cover