decorflame M100-25FAO Instruction Manual - Page 10

Browse online or download pdf Instruction Manual for Indoor Fireplace decorflame M100-25FAO. decorflame M100-25FAO 12 pages. Electric fireplace heater

Print Page

Fig. A

REPAIRS

If any problems are found with the original

parts during mantel assembly such as the

panels cannot be installed with the plastic

connector. Try to solve by one of the following

methods.

Tools required: Electric drill, drill bits 3/4 in

(10 mm) or 1/16 in (2 mm), pencil, hammer,

Philips screwdriver, safety goggles and gloves

(if necessary).

WARNING: Wear goggles before you

start drilling.

Option 1: Use the spare KD NUTS, KD

SCREWS and PLASTIC CONNECTOR

1. Place the PLASTIC CONNECTOR on the

mantel unit and mark the drill-holes as

shown in Fig. B.

MAINTENANCE /

Fig. B

REPAI RS

2. Drill the holes with diameter 3/4 inches

(10 mm) and depth 3/4 inches (10mm) on

the mantel. Each Plastic Connector needs 3

holes. See Fig. C.

Fig. C

3. Gently install the KD NUTS into the

drilled-holes with hammer as shown in

Fig. D.

4. Attach the PLASTIC CONNECTOR and

lock in place with KD SCREWS as shown

in Fig. E.

Fig. E

Option 2:

Use the SMALL L-BRACKETS and

SCREWS.

1. Place the SMALL L-BRACKET to the unit

as shown and mark the drill-holes on the

mantel as shown in Fig. F.

Fig. D