ADF Web AXIS HD67555 User Manual - Page 16

Browse online or download pdf User Manual for Network Hardware ADF Web AXIS HD67555. ADF Web AXIS HD67555 20 pages.

Print Page

Industrial Electronic Devices

UPDATE DEVICE:

By pressing the

"Update

Device" button it is possible to load the created Configuration into the device; and also the Firmware, if is

necessary.

In order to load the parameters or update the firmware in the Converter, follow these

instructions:

Turn off the Device;

Connect the Null Modem Cable form your PC to the Gateway;

Put Dip2 of Dip-Switch A at "ON" position (see "FUNCTION MODES" section);

Select the

"COM

port" and press the "Connect" button;

Turn on the device;

Check the BOOT Led. It must blink quickly (see "LEDS" section);

Press the "Next" button;

Select which operations you want to do.

Press the

"Execute update

When all the operations are "OK" turn off the device;

Put Dip2 of Dip-Switch A at "OFF" position;

Disconnect the RS232 Cable;

Turn on the device.

At this point the configuration/firmware on the device is correctly update.

Figure 6: "Update Device" windows

ADFweb.com Srl – IT31010 – Mareno – Treviso

firmware" button to start the upload;

User Manual DeviceNet Master / PROFIBUS Slave

Document code: MN67555_ENG

INFO:

www.adfweb.com

Revision 1.003

Page 16 of 20

Phone +39.0438.30.91.31