AirGuard 7392 Installation Manual - Page 4

Browse online or download pdf Installation Manual for Farm Equipment AirGuard 7392. AirGuard 7392 5 pages. Seed brakes

Print Page

STEP 2

Mark the hose and use your hose cutter to cut the seed tube at the desired location on every hose.

Attach all of the Seed Brakes to every cut hose using the supplied sabre clamps. Only attach the inlet

side of the Seed Brake at this time.

STEP 3

Start the Tractor and turn on the fan. Set the air speed to your highest RPM used for seeding. This will

make it easier to balance the air flow on each Seed Brake in the following steps.

STEP 4

Choose a Seed Brake in the center of the drill or where the airflow is strongest and insert a 6" piece of hose to

the exit port. Take the wind meter and measure the wind speed exiting the Seed Brake. Record the

observed target speed as this will be used to balance all of the other Seed Brakes.