alkitronic CLS Operating And Maintenance Manual - Page 9

Browse online or download pdf Operating And Maintenance Manual for Tools alkitronic CLS. alkitronic CLS 12 pages. Compact torque multiplier
Also for alkitronic CLS: Operating And Maintenance Manual (12 pages)

Print Page

2.7

Finishing or interruption the work (even with

change of accessories)

• Interrupt the air pressure in the machine

• Disconnect the compressed air supply to the maintenance

unit or to the supply system

• By briefly switching on the machine, remove any residual air

• Decouple the compressed air hose on the machine

Beware of components exposed to high air pressure:

Unintentional operation of the alkitronic® CL may

result in injury or property damage.

When removing the compressed air hose from the

machine, always disconnect the air supply first. An

out of control compressed air hose can cause injury

or property damage.

In the event of prolonged periods without use, oil

must be supplied to the engine via the compressed

air inlet on the pistol grip. This prevents corrosion

damage to the motor lamella (see section 3.3 Main-

tenance and 4.1 Air lubrication).

Service

Do not use damaged alkitronic® CL torque

multipliers and accessories. Only use original

alkitronic® spare parts / accessories.

3.1

Changing from standard nut, standard connector

and DMA (CLD, CLD/L, CLS, CLS2)

• Interrupt compressed air supply - uncouple the com-

pressed air hose at the machine

• Place the alkitronic® CL on a flat surface

• Remove rubber ring (6) and locking pin (7) or locking

screw (8)

• Remove standard nut / connector (2) / (3) towards the

front (Fig. 7.1)

• Pull DMA (1) out of the gearing (4) towards the front (Fig. 7.1)

• Assembly is in reverse order

Pneumatic Torque Multiplier

3.2

alkitronic® DMA

Torque reaction absorber

Changing the alkitronic® STA (Standard adapter)

and the support plunger for type RCL

Always insert the support pin and / or standard

adapter completely, otherwise the housing can be

severely damaged during operation.

Support plunger

Fig. 7.1

alkitronic® STABI

Standard connector

alkitronic® STACO

Standard nut

alkitronic®

STACO

Standard

nut

Support plunger

alkitronic® STA

Standard adapter