Garmin VHF 110 AIS series Installation Instructions - Page 3
Browse online or download pdf Installation Instructions for Marine Radio Garmin VHF 110 AIS series. Garmin VHF 110 AIS series 4 pages.
Print PageItem
Description
Compatible NMEA 2000 chartplotter or other device
VHF 110/210 AIS device
Ignition or in-line switch
NMEA 2000 power cable
NMEA 2000 drop cable
12 Vdc power source
NMEA 2000 terminator or backbone cable
NMEA 2000 T-connector
NMEA 2000 terminator or backbone cable
NMEA 0183 Device Connections
This diagram illustrates two-way connections for both sending and receiving
data. You can also use this diagram for one-way communication. To receive
information from a NMEA 0183 device on this device, refer to items
and
in the second table. To transmit information to a NMEA 0183 device
from this device, refer to items
,
,
Item
Description
Power source
Power cable
NMEA 0183 device
NMEA 0183 cable
Item
Garmin Wire
Function
Power
Power ground
Not applicable
RxA (+)
RxB (-)
TxA (+)
TxB (-)
Connecting to a Hailer Horn or PA Speaker
You can connect the radio to a hailer horn or public address (PA) speaker (not
included) to use the microphone or the handset to make announcements.
1
If necessary, mount the hailer horn or PA speaker according to the
installation instructions provided with the device.
NOTE: To avoid feedback, you should mount the hailer horn or PA
speaker at least 3 m (10 ft) away from, and facing away from, the
microphone or handset.
,
,
,
, and
in the second table.
Garmin Wire Color NMEA 0183 Device
Wire Function
Red
Power
Black
Power ground
Not applicable
Data ground (if
applicable)
Purple
TxA (+)
Gray
TxB (-)
Blue
RxA (+)
Brown
RxB (-)
2
Route or extend the wire from the hailer horn or PA speaker to the radio.
3
Connect the white wire on the radio wiring harness to the positive (+) wire
from the hailer horn or PA speaker.
4
Connect the green wire on the radio wiring harness to the negative (-) wire
from the hailer horn or PA speaker.
5
Cover the connections with a waterproof tape or heat-shrink tubing.
Connecting to an External Speaker
You can connect the radio to an external speaker (not included) to hear the
radio at a remote location.
1
If necessary, mount the speaker according to the installation instructions
provided with the device.
2
Route or extend the wire from the speaker to the radio.
3
Connect the red wire on the radio wiring harness to the positive (+) wire
from the speaker.
4
Connect the black wire on the radio wiring harness to the negative (-) wire
from the speaker.
5
Cover the connections with a waterproof tape or heat-shrink tubing.
Appendix
Specifications
Specification
Measurement
Dimensions (H x W x D)
VHF 110: 8.5 x 17 x 14.6 cm (3.35 x 6.7 x 5.75 in.)
VHF 210 AIS: 9.8 x 19.7 x 14.9 cm (3.86 x 7.76 x
5.78 in.)
Weight
VHF 110 (with microphone): 1.241 kg (43.77 oz.)
VHF 210 AIS (without microphone): 1.212 kg (42.75 oz.)
VHF 210 AIS microphone: 0.248 kg (8.75 oz.)
Temperature range
Operating: From -15° to 70°C (from 5° to 158°F)
Storage: From -20° to 70°C (from -4° to 158°F)
Compass-safe distance
VHF 110: 70 cm (27.6 in.)
VHF 210 AIS: 75 cm (29.5 in.)
Water rating*
IEC 605290 IPX7
Antenna connector
S0-239 (50 Ω)
Operating voltage
12.0 Vdc
Current draw
Standby: 350 mA
Receive: 600 mA
Transmit: From 2.0 A to 6.0 A (from 1 W to 25 W)
Maximum antenna gain
9 dBi
Antenna port impedance
50 Ω
Audio output power
Internal speaker: 1 W (with 4 Ω at 10% distortion)
External speaker (optional): 4 W (4 Ω/max)
Hailer output power
20 W at 4 Ω
External speaker impedance 4 Ω
Hailer horn impedance
4 Ω
NOTICE
The device is water resistant to IEC Standard 60529 IPX7. It can withstand
accidental immersion in 1 meter of water for 30 minutes. Prolonged
submersion can cause damage to the device. After submersion, be certain to
wipe dry and air dry the device before using or charging.
NMEA 2000 PGN Information
Receive
059392 ISO acknowledgment
059904 ISO request
060928 ISO address claim
126208 NMEA request/command/ack
129026 COG/SOG, rapid update
129029 GNSS position data
Transmit
059392 ISO acknowledgment
060928 ISO address claim
126208 NMEA request/command/ack
126464 PGN list
126996 Product information
129799 Radio frequency/mode/power
129808 DSC call information
3