All American Scoreboards 8000 Series Instructions Manual - Page 5
Browse online or download pdf Instructions Manual for Sports & Outdoors All American Scoreboards 8000 Series. All American Scoreboards 8000 Series 7 pages. Football scoreboards remote and remote receiver instructions
Also for All American Scoreboards 8000 Series: Manual (15 pages), Operation Manual (14 pages)
Print Page
Gameplay
LED Brightness on Scoreboard
Press this key toggle between the 8 available brightness levels for the scoreboard(s).
Note: After the brightest setting (8), the scoreboard will display the lowest setting (a brightness of 1).
Down
Press this key to toggle through downs 1,2,3,4 and blank.
Yards To Go
Press to turn remote into Numeric Keypad Mode to edit the yards to go.
Example: To change the yards to go to 10, press
TIP: Once an edit button is pressed, the remote will go into Numeric Keypad Mode. The remote is waiting for further
instructions - in this case, how many yards to go to display. After pressing the edit key, enter the number (in this
example, enter a value of 10) and then ENTER. The yards to go will not change until
editing the yards to go, press the clear key or any other non-multi-function key.
Ball On
Press to turn remote into Numeric Keypad Mode and to edit the yardline that the ball is on.
Example: To change the ball on to 20, press
TIP: Once an edit button is pressed, the remote will go into Numeric Keypad Mode. The remote is waiting for further
instructions - in this case, what yardline the ball is on. After pressing the edit key, enter the number (in this example,
enter a value of 20) and then ENTER. The scoreboard will not change until
yards to go, press the clear key or any other non-multi-function key.
Quarter
Press this key to toggle through the quarters as defined in SETUP, usually 1,2,3,4 and 0 for overtime.
Possession
Press this key to toggle the possession between home and guest.
Horn
Press this key to activate the horn (if installed).
Delay of Game Timer
Press this key to start and/or stop the Delay of Game (DOG) Timer.
Press to turn remote into Numeric Keypad Mode to edit the DOG timer.
Example: To change the DOG timer to 25, press
TIP: Once an edit button is pressed, the remote will go into Numeric Keypad Mode. The remote is waiting for further
instructions - in this case, a time for the DOG timer to display. After pressing the edit key, enter the number (in this
example, enter a value of 25) and then ENTER. The DOG timer will not change until
editing the yards to go, press the clear key or any other non-multi-function key.
Press this key to reset the DOG timer to the first reset as defined in Setup.
Press this key to reset the DOG timer to the second reset as defined in Setup.
.
.
is pressed. To cancel editing the
.
is pressed. To cancel
is pressed. To cancel
5