All American Scoreboards 8206 Manual - Page 6
Browse online or download pdf Manual for Sports & Outdoors All American Scoreboards 8206. All American Scoreboards 8206 15 pages. Racing scoreboards
Print Page
Selecting Scoreboards
The 8000 Series Console is a powerfull and intelligent scoring machine. A single console, for example, can
keep score for football in the fall, basketball in the winter and baseball in the spring. This machine can also
select any 8000 scoreboard or message center you have in your facility.
Each time you order a scoreboard, it will be issued an identification number. If you have multiple 8000 series
scoreboards, the ID number will be an important part of your scoring system.
STEP 1: Turn on Scoreboard(s).
Turn on your scoreboard(s) by simply supplying power.
For most facilities, this will simply be a switch or multple
switches in a circuit breaker box.
Step 2: Turn on your console.
1 . S C O R E B O A R D
2 . S T A T P A N E L
Step 3: Press 1 for scoreboard operation.
U s e L a s t s e t u p ? _ Y e s
B a s k
1 B o a r d
Step 4: Press
E n t e r S c o r e b o a r d I D s
E N T E R w h e n d o n e _
Step 5: Enter Scoreboard IDs (read below).
The screen above will appear when "Use last setup?" is answered "No." Every 8000 Scoreboard that was turned
on and not currently in use will display the scoreboard ID in the seconds place and/or the guest score of the
scoreboard (home score for baseball). If your scoreboard displays both time and scores, the ID will be
displayed in both locations. Any other information displayed can be ignored.
Enter the ID code displayed on the desired scoreboard and press
enter the next ID followed again by
be played (see setup).
ADDITIONAL INFORMATION:
Once the boards have been selected, the console and all selected scoreboards will switch from their default
channel to another channel. The ability to switch channels allows the unselected scoreboards to be selected
by another console - making it easy to run multiple sporting events at the same time. If a scoreboard is not
chosen, it will either display time of day or appear to be off (see setup).
IMPORTANT: SELECT BOARDS WITH ONLY ONE CONSOLE AT A TIME.
If multiple consoles will be used, select boards with one console before turning on second (third, fourth, etc.)
console. Since each console will start on the same default channel, the signal from the consoles will fight each
other, and will likely result in failure and interference. Once the selection process is completed and a sport is
selected, another console can be turned on. Scoreboards that are in use will not display their IDs and will not
respond to any requests by other consoles.
For detailed examples and information regarding changing IDs, see next page.
6
(Radio Units Only). FIRMWARE VERSION 2.00 AND ABOVE
- >
to change the answer from "Yes" to "No" , and then press
. When finished selecting boards, press
U s e L a s t s e t u p ? _ N o
B a s k
1 B o a r d
I D = 1 ,
E N T E R w h e n d o n e
. If selecting more than one scoreboard,
.
. Next, select the sport to
.