Brother DCP-377CW Quick Setup Manual - Page 23
Browse online or download pdf Quick Setup Manual for All in One Printer Brother DCP-377CW. Brother DCP-377CW 29 pages. Inkjet dcp/mfc
Also for Brother DCP-377CW: Quick Setup Manual (39 pages), Parts Reference List (32 pages)
Print Page
Safety and Legal
To use the machine safely
Please keep these instructions for later reference and read them before attempting any maintenance.
WARNING
There are high voltage electrodes inside the machine.
Before you clean the inside of the machine, make sure you
have unplugged the power cord from the electrical socket.
Doing this will prevent an electrical shock.
DO NOT handle the plug with wet hands. Doing this might
cause an electrical shock.
DO NOT pull in the middle of the power cord. Doing this
might cause an electrical shock.
DO NOT use flammable substances, any type of spray,
liquid or aerosol cleaners to clean the inside or outside of
the machine. Doing this may cause a fire or electrical
shock.
If the machine becomes hot, releases smoke, or generates
any strong smells, immediately unplug the machine from
the electrical socket. Call your Brother dealer or Brother
Customer Service.
If metal objects, water or other liquids get inside the
machine, immediately unplug the machine from the
electrical socket. Call your Brother dealer or Brother
Customer Service.
This product must be installed near an electrical socket
that is easily accessible. In case of an emergency, you
must unplug the power cord from the electrical socket to
shut off the power completely.
This product should be connected to an AC power source
within the range indicated on the rating label. DO NOT
connect it to a DC power source or inverter. If you are not
sure, contact a qualified electrician.
Always make sure the plug is fully inserted.
DO NOT use the machine if the power cord is frayed or
damaged, doing so may cause a fire.
23