Brother DCP-7180DN Product Safety Manual - Page 11
Browse online or download pdf Product Safety Manual for All in One Printer Brother DCP-7180DN. Brother DCP-7180DN 21 pages. Airprint guide
Also for Brother DCP-7180DN: Manual (12 pages), Quick Setup Manual (2 pages)
Print Page
Connecting the product safely
A
WARNING
There are high voltage electrodes inside the product. Before you clean the inside of the product,
make sure you have unplugged the telephone line cord first (MFC only) and then the power cord
from the electrical socket. Doing this will prevent an electrical shock.
DO NOT use the AC power cord to pull or push the plug into the wall socket, use the finger grips
on the plug.
DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.
Always make sure the plug is fully inserted.
This product should be connected to an AC power source within the range indicated on the
rating label. DO NOT connect it to a DC power source or inverter. If you are not sure, contact a
qualified electrician.
This product is equipped with a 3-wire earthed plug. This plug will only fit into an earthed power
outlet. This is a safety feature. If you are unable to insert the plug into the outlet, call your
electrician to replace your obsolete outlet. DO NOT defeat the purpose of the earthed plug.
11