Brother TD-2130NHC Quick Manual - Page 2

Browse online or download pdf Quick Manual for Printer Brother TD-2130NHC. Brother TD-2130NHC 2 pages. Brother td-2130nhc thermal printer quick guide

Print Page

TD-2130NHC

HOW TO LOAD TrustSense™ MEDIA

1. Press the (Power) button to turn

the TD-2130NHC printer on,

POWER indicator turns solid green.

2. Locate the cover release lever on

either side of the printer and open the roll compartment top cover.

3. Locate the green media guide adjustment lever (A), lift up and adjust the media guides apart.

4. Drop in a TrustSense™ smart media roll (B), positioned so that the wristbands or labels come off from

the top of the roll.

5. Adjust the media guides (C) to securely position the media roll in the center of the printer.

6. Position the first wristband or the first few labels off the top of the media roll under the purple guide

tips (D) and resting in the center of the lower media exit.

7. Close roll compartment top cover.

8. The printer will automatically advance one wristband or a few labels, read the smart media pattern

printed on the backside and then automatically program the proper media settings.

9. The TD-2130NHC printer is now ready to use with the loaded TrustSense™ smart media roll.

NOTE: The TD-2130NHC printer will automatically advance one wristband or a few labels to read the first

smart media pattern printed on the backside every time the printer top cover is closed while the printer is

powered on. This is operation is called automatic media calibration.

TIP: When loading a new roll of the same TrustSense™ smart media, you can cancel the automatic media

calibration operation to help reduce wasting unused media by pressing the (Feed) button right after closing

the roll compartment top cover.

PRINTING CONFIGURATION REPORT: For best results, load a 2" to 2-1/4" wide continuous roll of standard

thermal media with the printer turned off. After the roll compartment top cover is closed, turn on the power

and hold down the (Print) button until the configuration report starts to print out.