Fujitsu PRIMERGY ECONEL30 Configuration Manual - Page 8

Browse online or download pdf Configuration Manual for Server Fujitsu PRIMERGY ECONEL30. Fujitsu PRIMERGY ECONEL30 11 pages. System configurator and order-information guide

Print Page
C
VII
Section
A. SCSI Controller for backup drives
S26361-F2644-E3
SCSI Controller UW
with LSI Chip 53C1000R
1 channel LVD,
for internal backup drive
max. 160MB/s; with cable
64/66 PCI, min 166mm,
PCI standard profile
int: HD68 LVD, ext:
SW:
max. 1x per system
B. SCSI Controller for external peripheral devices
S26361-F2399-E1
SCSI 160 Controller
Adaptec SCSI Card 29160
1 channel: LVD + Fast/ Ultra (decoupl.)
LVD connect. for HD, without cable
Fast/Ultra connect. for acc. drives
64/66 (32/33) PCI, min 180 mm, hp
int: Fast 50 pins or Ultra HD68
+ LVD HD68; ext: HD68(LVD)
SW:
max. 1 per system
VIII
Section
S26361-F2567-E2
IDE RAID Controller
Promise Fasttrak 100 LP
2-channel IDE RAID Controller
max. 100MB/s, with cable
1 HD per channel max.
32/66 PCI, min. 180mm
int.: 2 x ATA 100 UDMA
ext.:
SW:
max. 1x per system
D
SCSI Controller
There are 7 slots (max. 340 mm): 1x AGP (ocuppied by AGP graphics card), 6x PCI long
Disk array
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server
System configurator and order-information guide
PRIMERGY Econel30
SCSI Controllers only for backup drives
In SCSI Basic Units not necessary
In RAID-modus you need 2 IDE RAID Controller for the connection
of 4 hard disk drives!
A second IDE RAID Controller can only later be ordered as -L part number.
It may be mounted only after installation of the operating system.
IDE RAID Controller are only released for
IDE Basic Units!
Status 2003-10-28
8 of 11