Fujitsu fi-5000N Getting Started - Page 13

Browse online or download pdf Getting Started for Scanner Fujitsu fi-5000N. Fujitsu fi-5000N 29 pages. Fujitsu fi-5000n: user guide
Also for Fujitsu fi-5000N: Technical Specifications (2 pages)

Print Page

3. Enter the Administrator PIN (the default setting

is "5000"), and press the [ENT] key.

4. Select "Configure Network", and press the

[ENT] (Enter) key.

The following network configuration screen appears.

Do you want to

use DHCP?

Use DHCP

Use Static IP

5. To obtain the IP address automatically from the

DHCP (Dynamic Host Configuration Protocol)

server, select "Use DHCP" and press the [ENT]

key.

To set the IP address manually, select "Use

Static IP" and press the [ENT] key.

If "Use DHCP" is selected: It is not necessary to

specify the IP address, subnet mask and default gate-

way. Go to step 9.

If "Use Static IP" is selected: The following net-

work configuration screen appears.

IP Address:

Certain DNS servers and DHCP serv-

ATTENTION

ers, which do not support DNS

update, may cause host name resolu-

tion problems when DHCP is speci-

fied in IP address settings with

fi-5000N.

If you experience such problems, con-

sult with your network administrator

and take one of the following mea-

sures for fi-5000N and PC:

For fi-5000N,

1. Change to DNS server and

DHCP server which support DNS

update.

2. Set the IP address lease time

longer in DHCP server settings.

3. Use static IP method.

For PC,

1. Change to DNS server and

DHCP server which support DNS

update.

2. Set the IP address lease time

longer in DHCP server settings

and register the PC name on the

DNS server.

3. Use static IP method.

6. Enter the IP address.

The currently configured IP address is displayed on

the entry field. To change, press the [ESC] key once

to clear the entry field. Press the [ENT] key after you

have entered the correct address.

7. Enter the subnet mask next.

The subnet mask currently configured is displayed on

the entry field. To change, press the [ESC] key once

to clear the entry field. Press the [ENT] key after you

have entered the correct value.

8. The default gateway settings screen appears

next.

The portion specified at the IP address and subnet

mask will be displayed. Enter the remaining portion

of the default gateway and press the [ENT] key.

9. Enter the DNS server addresses

(DNS1: Primary;

DNS2: Secondary)

The currently configured address is displayed on the

entry field. To change, press the [ESC] key once to

clear the entry field. Press the [ENT] key after you

have entered the correct value.

To skip this step, clear the currently displayed

address or enter "0.0.0.0" on the entry field.

If the default gateway is correct, the Speed/Duplex

(Auto Negotiation) settings screen appears.

Select Speed/Duplex

Auto Negotiation

100BASE-TX Full

100BASE-TX Half

10.Press the [ ] or [ ] key to select one from

among "Auto Negotiation", "100BASE-TX Full",

"100BASE-TX Half", "10BASE-TX Full" and

"10BASE-TX Half", and press the [ENT] key.

Usually "Auto Negotiation" is selected. The

following network settings confirmation screen

appears when you press the [ENT] key.

:XXX.XXX.XXX

MASK:XXX.XXX.XXX

:XXX.XXX.XXX

OK:[ENT]/NG:[ESC]

11.Confirm the contents of the settings.

To change the settings, press the [ESC] key until it

returns to the setting screen of the item to change,

and configure again.

fi-5000N Getting Started