Brother HL-6180DW Quick Setup Manual - Page 22

Browse online or download pdf Quick Setup Manual for Print Server Brother HL-6180DW. Brother HL-6180DW 35 pages. Zlt
Also for Brother HL-6180DW: Manual (30 pages), Installation Manual (16 pages), Quick Setup Manual (35 pages), Product Safety Manual (23 pages), Installation Manual (16 pages)

Print Page

For Wireless Network Users

Manual setup from the control panel using the Setup Wizard

(Macintosh, mobile devices and Windows

Setup the wireless

settings

Important

You must have the wireless settings you wrote

down for your network in step 10-b on page 19

before you proceed.

Note

If you use your machine in an IEEE 802.1x

supported wireless network, see Using IEEE

802.1x authentication in the Network User's

Guide.

If you began the wireless setup from step 5 on

page 5 (for Macintosh and mobile devices), go

to c.

All other users, go to b.

On your machine, press a or b to choose

Network and press OK.

Press a or b to choose WLAN and press OK.

Press a or b to choose Setup Wizard and

press OK.

When WLAN Enable? is displayed, press a to

accept. This will start the wireless setup wizard.

Otherwise press Cancel to exit from the

wireless setup wizard.

The machine will search for available SSIDs. It

will take several seconds to display a list of

available SSIDs.

If a list of SSIDs is displayed, use the a or b key

to choose the SSID you wrote down in step

10-b on page 19, then press OK.

Do one of the following:



If the wireless access point/router of the

selected SSID supports WPS and

WPS is available appears, press a and

go to f.



If you are using an authentication and

encryption method that requires a Network

Key, go to g.



If your authentication method is Open

System and your encryption mode is None,

go to h.

)

Note

• If a list of SSIDs is not displayed, make sure

your wireless access point/router is on. Move

your machine closer to the wireless access

point/router and try starting from b again.

• If your wireless access point/router is set to not

broadcast the SSID you will have to manually

add the SSID name. For details, see

Configuring your machine when the SSID is not

broadcast in the Network User's Guide.

To connect your machine using the automatic

wireless mode, press a to choose Yes. (If you

choose No, go to g to enter the Network Key.)

When Press WPS on rtr appears, press

the WPS button on your wireless access

point/router, and then press a twice. Go to h.

Enter the Network Key you wrote down in step

10-b on page 19.

To enter a character or number, hold down or

repeatedly press the a or b key until the

character you want appears, and then press

OK.

To delete the characters you have entered,

press the Back key.

For more information, see Entering Text for

Wireless Settings on page 27.

Press OK when you have entered all the

characters, then press a for Yes to apply your

settings.

Your machine will now try to connect to your

wireless network using the information you

have entered.

A connection result message appears on the

LCD and a WLAN report will automatically be

printed.

If the connection failed, check the error code on

the printed report and refer to

Troubleshooting on page 25.