Brother NC-13004h User Manual - Page 20

Browse online or download pdf User Manual for Print Server Brother NC-13004h. Brother NC-13004h 36 pages. Td series multi-protocol on-board ethernet print server

Print Page

Configuring the standard TCP/IP port

Printer driver not yet installed

For Windows Vista

, Windows

For Windows Vista

Click the

(Windows Vista

Sound and open Printers.

For Windows

7/ Windows Server

Click the

(Windows

Click Add a printer.

Choose Add a local printer.

You must now choose the correct Network printing port. Choose Create a new port and choose

Standard TCP/IP Port from the pull-down window, then click Next.

Enter the IP address, or the print server name you wish to configure. The Wizard will automatically enter

the Port name information for you, then click Next.

Windows Vista

, Windows

specified. If you did not specify the correct IP address or name then an error dialog will appear.

Now that you have configured the port, you must specify which printer driver you wish to use. Choose

the appropriate driver from the list of supported printers. If you are using a driver supplied with the printer

on CD-ROM then choose the Have Disk option to browse to the CD-ROM.

For example, choose the "X:\your language\Drivers\TD-XXXX\x86\Driver\i386" or

"X:\your language\Drivers\TD-XXXX\x64\Driver\x64" folder (where X is your drive letter. XXX is your

model name). Click Open, and then OK. Choose your printer model, then click Next.

Specify a name and click Next.

Note

• When the User Account Control screen appears, click Continue.

• If the printer driver that you are installing does not have a Digital Certificate you will see a warning

message. Click Install this driver software anyway to continue with the installation.

Continue through the Wizard clicking Finish when complete.

7, Windows Server

/ Windows Server

2008:

)/ Start (Windows Server

2008 R2:

7)/ Start (Windows Server

7 and Windows

Network printing: basic TCP/IP Peer-to-Peer printing

2008/2008 R2

2008), Control Panel, go to Hardware and

2008 R2), and open Devices and Printers.

2008/2008 R2 will now contact the printer that you