Indesit KD341GW Instructions For Installation And Use Manual - Page 6

Browse online or download pdf Instructions For Installation And Use Manual for Cookers Indesit KD341GW. Indesit KD341GW 24 pages. 50cm gas cooker

Print Page

Hotplate

The hotplate has one large high speed burner, two normal simmering burners and one

small simmering burner which will accommodate pans between 100mm (4") and

200mm (8") diameter. All pans should be positioned centrally over the burners.

The pan supports should be fitted on the hotplate such that the indents along one side

of each pan support are inner-most.

Those models fitted with a hotplate lid have a safety device which cuts off the gas

supply to the hotplate unless the lid is fully open. Do not use the safety device as a

means of controlling the burners.

TO USE THE HOTPLATE

1. Press the ignition button and then push in and turn the control knob of the

chosen burner anti-clockwise to the large flame symbol. Continue to press

the ignition button until the sparks light the gas.

2. Turn the control knob anti-clockwise to the desired setting.

Only turn the control knob between the large flame symbol and the small

flame symbol for adjusting the setting.

3. To turn off, turn the control knob fully clockwise to the symbol O.

DO NOT use mis-shapen pans which may be unstable.

DO NOT use round base woks directly on the pan supports.

DO NOT use the glass lid (if fitted) as a working surface.

Each burner is fitted with a spark ignition electrode for lighting the gas. To ensure rapid

lighting of the burners every time they are used, the electrodes must be kept clean

and dry. Remove any food spillage or cleaning materials from the electrode using a

small nylon brush such as a tooth brush. Access to the electrode can be achieved by

lifting off the loose burner parts carefully when the burners are cool.

If aluminium based pans are used, a silvery deposit may appear on the top edge of the

pan support fingers. See 'Care and Cleaning' section for cleaning information.