Aqua Flo Flo-Master HP Series Owner's Manual - Page 6

Browse online or download pdf Owner's Manual for Water Pump Aqua Flo Flo-Master HP Series. Aqua Flo Flo-Master HP Series 9 pages.

Print Page

11. Cover can be mounted to the volute in one orientation only. An 'aligning' feature

is built-in with each part to ensure proper mounting. When properly aligned, the

cover should slide in easily.

12. Secure the cover to the volute with screws. Tighten all screws alternately

(crisscrossing the cover) to achieve proper o-ring compression and cover

seating.

13. Rotate the impeller by hand to make sure that it is rotating freely without

interference.

Reconnecting the Pump Unit

14. Clean the seals, gaskets, or o-rings for the plumbing connectors. Replace if

cracked, worn, or damaged.

15. Reconnect the plumbing lines to the pump. Hand tighten only.

16. Be sure that the pump unit is secured properly to the platform or base, if

applicable. Tighten the bolts if necessary.

17. Reconnect the power supply. Be sure that all wiring is properly and securely

connected.

CAUTION:

BEFORE TURNING THE POWER ON, BE SURE THAT:

1. THERE IS AN ADEQUATE AMOUNT OF WATER IN THE SYST M.

2. ALL VALVES ARE OPEN TO ALLOW WATER CIRCULATION.

3. ALL CONNECTORS AND FITTINGS ARE PROPERLY ALIGNED AND

SECURED.