Avocent DSR Series DSR8030 Firmware Release Notes - Page 3

Browse online or download pdf Firmware Release Notes for Switch Avocent DSR Series DSR8030. Avocent DSR Series DSR8030 3 pages. Avocent dsr series dsr1030: install guide
Also for Avocent DSR Series DSR8030: Hardware Specifications (2 pages), Release Note (3 pages), Firmware Release Notes (3 pages), Firmware Release Notes (3 pages), Release Note (3 pages), Specifications (2 pages), Quick Installation Manual (8 pages)

Print Page

=============================================================================

This release contains no known issues.

=============================================================================

If the green power LED on the front and back panel of the DSR switch blinks continuously, the switch

is in recovery mode. Use the following steps to recover from a failed FLASH upgrade:

1. Set up the TFTP server with server IP address 10.0.0.3.

2. Rename the flash update file to the appropriate filename from the following list and place it into the

appropriate directory on the TFTP server.

3. If the DSR switch is not on, turn it on now.

4. The recovery process will start automatically.

NOTE: If you do not have a TFTP server, there are several shareware and freeware programs on the

Internet that you can download and install.

Known Issues

FLASH Update Failure Recovery

Switch

DSR1021, DSR1022

DSR1024

DSR1031

DSR1020, DSR2020, DSR4020

DSR8020

DSR1030, DSR2030, DSR4030, DSR8030

DSR2035, DSR8035

Filename

DSR1021.fl

DSR1024.fl

DSR1031.fl

DSRxx20.fl

DSR8020.fl

DSRxx30.fl

DSR8035.fl