AVPro Edge AC-MX-88X Quick Start Manual - Page 3

Browse online or download pdf Quick Start Manual for Matrix Switcher AVPro Edge AC-MX-88X. AVPro Edge AC-MX-88X 4 pages. 8к 40gbps hdmi 8x8 matrix switcher

Print Page
AVPro Edge AC-MX-88X Quick Start Manual
1. Enter the EDID Settings Menu.
2. Press the button to select the Input for the EDID you will be changing.
3. Press Enter to prepare the selected Input for an EDID change.
4. Use the Up or Down Menu buttons to scroll through the EDID options from the Table
above.
5. Press the Enter button to select the new EDID you are assigning to the Input.
NETWORK SETUP:
By default, the AC-MX-88X ships set to DHCP. The IPv4 address is easily found by navigating
to the Network Settings Menu. Network settings may be adjusted by the following:
1. Use the Up or Down arrow buttons to navigate to the desired field.
2. Press the Enter button to select the field
3. Use the Up or Down arrow buttons to change the field value. When in the Host IP,
Netmask, or Router IP (Gateway) fields, use the Left or Right arrow buttons to change
between octet fields.
4. Press the Enter button to apply changes to the fields.
Once the Host IP (the IPv4 Address of the device) is known, the AVPro Edge web GUI may be
used toconfigure the switch or use the enhanced diagnostics.
RS232:
For control via RS-232, please follow the wiring information below. When connecting to a