AVProConnect AC-EX70-UHD User Manual - Page 7

Browse online or download pdf User Manual for Extender AVProConnect AC-EX70-UHD. AVProConnect AC-EX70-UHD 16 pages. 4k hdmi 2.0 extender with hdcp 2.2
Also for AVProConnect AC-EX70-UHD: User Manual (12 pages), User Manual (12 pages)

AC-EX70-UHD-KIT
The Transmitter
Indicator Troubleshooting Lights on the Transmitter:
POWER - On the back by power supply input:
the power is connected. There are only two states for light:
• Light Is On = Power supply is connected and functioning.
• Light Is Off = Power supply is not connected or there is no power present.
(In order to have power: check the power supply, USP, Outlet, etc...)
SIGNAL - On front by HDMI Port:
source is connected. The states are:
• Light Is On (Solid) = Sync w/ HDMI source is correct and solid.
• Light Is Flashing = The light flashes during the sync process. If it is flashing
continuously, a picture may not be present.
If the
BLUE HDMI STATUS LIGHT
1. The source. Plug it directly into the display to be sure it's functioning
properly.
2. Try a longer HDMI cable. Some HDMI cables do not sync well at shorter
lengths.
3. Contact AVProConnect if these suggestions do not work.
AVProConnect | 3518 N Casco Avenue | Sioux Falls, SD 57104 | 1-877-886-5112 | +1 605-274-6055 | [email protected]
BACK
RS232 Dip Switch: See
Power
RS232 Settings
Light
FRONT
(Red)
(Blue)
This indicator shows that the HDMI
is flashing, check the following:
7
HDBaseT
OUT
Signal Light
This is an indicator that