AVProConnect AC-DA210-HDBT Operation Manual - Page 6

Browse online or download pdf Operation Manual for Switch AVProConnect AC-DA210-HDBT. AVProConnect AC-DA210-HDBT 12 pages. The ac-da210-hdbt is a 2 hdmi in, 8 hdbaset out + 2 hdmi local output switch splitter.

Print Page

5. Package contents:

Main unit: AC-DA210-HDBT
1.
48V2A power supply for powering AC-DA210-HDBT
2.
6. Operation controls:
Switching:
The AC-DA210-HDBT can be switched from the front panel by pressing the "Input"
button. This switches back and forth from Input 1 and Input 2

EDID management:

Pressing and holding the button for more than 3 seconds will enter an EDID
1.
management mode.
When in EDID management mode the HDMI out LED's 1&2 will be flickering.
2.
HDBT out LED's 1 through 5 are used to identify the EDID setting.
3.
Press the button to cycle through the available EDID's
4.
Press and hold for 3 seconds again to set the selected EDID
5.
If all LED's light up it is successful, and press the button once more to return to
a)
normal operating mode.
If all LED's are flickering, the setting failed. Press the button to resume normal
b)
operating mode and try again.
6.
The table below (Page 7) shows the different EDID options.
©AVProConnect | 3518 N Casco Ave. Sioux Falls, SD 57104 1.877.886.5112 | +1.605.274.6055
6