Dell PowerEdge 1650 User Manual - Page 22

Browse online or download pdf User Manual for Server Dell PowerEdge 1650. Dell PowerEdge 1650 34 pages. Installing an era/o card
Also for Dell PowerEdge 1650: Instructions Manual (6 pages), Information Update (44 pages), Information Update (44 pages), Installation Manual (44 pages), Installation Manual (44 pages), Installation Manual (44 pages), Installation Manual (44 pages), Manual (15 pages), Installation Manual (44 pages)

Print Page
Dell PowerEdge 1650 User Manual
Problem (continued)
LAMP light is blinking
amber
TEMP light is solid amber
TEMP light is blinking
amber
The remote control is not
operating smoothly or
works only within a limited
range
LAN control support
22
Troubleshooting
Possible Solution (continued)
If the LAMP light is blinking amber, the
lamp module connection may be
disrupted. Please check the lamp module
and ensure that it is properly installed.
If the LAMP lights and the Power light is
blinking amber, the lamp driver has failed
and the projector will automatically shut
down.
If the LAMP and TEMP lights are blinking
amber and the Power light is solid blue,
the color wheel has failed and the
projector will automatically shut down.
To clear the protection mode, press and
hold the POWER button for 10 seconds.
The projector has overheated. The display
automatically shuts down. Turn the
display on again after the projector cools
down. If the problem persists, contact
Dell.
If the projector fan fails, the projector will
automatically shut down. Try to clear the
projector mode by pressing and holding
the Power button for 10 seconds. Please
wait for about 5 minutes and try to power
up again. If the problem persists, contact
Dell.
The battery may be low. If so, replace with
two new AAA batteries.
• Web Control functions were verified on
IE9, IE10, and IE11. The other version
may have compatibility problem.
• The Compatibility View setting should be
disabled. Otherwise the web control
page may have icon or content display
abnormal issue.