Dell PowerEdge 2450 Manual - Page 7

Browse online or download pdf Manual for Server Dell PowerEdge 2450. Dell PowerEdge 2450 15 pages. Wake-on-lan (wol) support on dell servers
Also for Dell PowerEdge 2450: Installation Manual (26 pages), Install Manual (32 pages), Installation Manual (20 pages), Information Update (12 pages), Supplementary Manual (30 pages), Hardware Install Manual (32 pages), Software Manual (10 pages), Installation Manual (8 pages)

Print Page
Dell PowerEdge 2450 Manual
3. Unplug the system and send it to the remote site to be installed.  The system 
must be removed from all A/C input for a period of at least 10 seconds to 
allow all capacitance to drain from the system so it resets to its default state.  
The system must not be powered on, just connected to A/C and the WOL 
enabled NIC connected to the active network.  The system is now ready to be 
powered on via WOL when needed. 
 
4. Send a 'Magic Packet' wake up signal to the MAC address of the WOL 
enabled NIC, and the system will boot.  Out‐of‐Box WOL can only be 
accomplished via the 'Magic Packet' WOL signal. 
October 2007
Page 7
Dell Enterprise Product Group