Dell PowerEdge C6100 Using Instruction - Page 16

Browse online or download pdf Using Instruction for Server Dell PowerEdge C6100. Dell PowerEdge C6100 48 pages. Poweredge series
Also for Dell PowerEdge C6100: Portfolio Manual (27 pages)

Print Page

2 Start the firmware update through TFTP by typing the appropriate command.

For example:

ipmitool -H 192.168.1.1 -U root -P root raw 0x08 0x01 0x01 0x00

0x01.

The response is 48 (task ID).

Running Virtual Media

The console redirection feature gives the managed server access to media connected to a remote

system on the network. The combination of virtual media and console redirection enables

administrators to perform tasks on the server without being physically present.

The two virtual media types are:

•

Optical Drive—Includes CDROM and ISO image files.

•

Floppy Drive—Includes diskette/USB drives and diskette images.

For each media type, you can virtualize one drive at a time. This may require that you disconnect

media before connecting to a different source.

NOTE:

You must have Access Virtual Media permission to virtualize or disconnect a drive.

Connecting and Disconnecting Virtual Media

Connect to media through the Device menu in the JViewer ( see"Console Redirection" for

directions for accessing the JViewer). Check the box next to the applicable media type(s).

If you are connecting to a diskette or ISO image, either browse to or enter the path where the image

file resides on your system.

NOTE:

Virtual device drive letters on the managed server do not correspond to physical drive letters on

the management station.

To disconnect media, deselect the applicable checkbox.

Using the Baseboard Management Controller