Dell Poweredge metered Manual - Page 11

Browse online or download pdf Manual for Server Dell Poweredge metered. Dell Poweredge metered 12 pages. Cabling poweredge t610
Also for Dell Poweredge metered: Manual (20 pages), Manual (20 pages), Manual (17 pages), Manual (12 pages), Manual (10 pages), Manual (10 pages), Manual (9 pages), Manual (9 pages), Manual (10 pages), Manual (12 pages), Manual (11 pages), Manual (8 pages)

Print Page

Cable Routing Procedures for Dell™ PowerEdge™ R415 Systems

Figure 10: Disconnecting the Inner CMA Attachment Bracket

Figure 11: Replacing the Outer Power Supply

Section 4: Cabling a PowerEdge™ R415 System Installed in Static Rails

NOTE: The CMA is compatible with the sliding rails only, not the static rails.

Follow the instructions contained in the

to install the server into a two-post or four-post rack.

2. Install the hook and loop straps provided in the rail kit through the slots in the rear brackets of

the rails as described in the

3. Connect all applicable cables to the rear of the system and verify that all connections are

secure.

Rack Installation Instructions

Disconnected inner

CMA bracket

found in the static rail kit

Page 9