Dell EMC PowerSwitch S6100-ON Installation Manual - Page 31

Browse online or download pdf Installation Manual for Switch Dell EMC PowerSwitch S6100-ON. Dell EMC PowerSwitch S6100-ON 48 pages.

Print Page

DC power supply connection

Each DC powered system comes with a set containing a prewired, 3-inch 8 AWG, power supply connector and a four-screw

wiring block. One set is provided for each DC PSU.

Figure 26. DC power connector and wiring block

1. DC wire RTN

3. Two Captive screws

5. PSU status LED

7. DC wire –48V

Figure 27. DC power connector ground

1. Ground nut

3. Lock washer

5. Device grounding rod

1. Strip 1/2 inches of insulation from each of the power connector's red and black wires, as shown.

2. Insert each of the power connector's bare wire lengths into the wiring block. Insert red into one hole and black into the other

hole, as shown.

2. DC power connector

4. Release tab

6. DC power socket

2. Washer

4. Ground cable

Power supplies