Dell Force10 S50N Series Quick Start Manual - Page 15

Browse online or download pdf Quick Start Manual for Switch Dell Force10 S50N Series. Dell Force10 S50N Series 25 pages. Rapid equallogic configuration series configuration introduction array: ps4100 host: vmware esxi
Also for Dell Force10 S50N Series: Implementation Manual (9 pages)

Print Page

Installing the Software

Navigating CLI Modes

The FTOS prompt changes to indicate the CLI mode. You must move linearly

through the command modes, with the exception of the end command which

takes you directly to EXEC Privilege mode; the exit command moves you up

one command mode level.

Console Access

Access the command line through a serial console port or a Telnet session.

When the system successfully boots, you enter the command line in the EXEC

mode.

NOTE: You must have a password configured on a virtual terminal line before you

can Telnet into the system. Therefore, you must use a console connection when

connecting to the system for the first time.

Serial Console

The RS-232 console port is labeled on the chassis. It is in the upper right-hand

side, as you face I/O side of the chassis.

a r

5 1

Installing the Software