Dell PowerEdge M610 Information Update - Page 4

Browse online or download pdf Information Update for Switch Dell PowerEdge M610. Dell PowerEdge M610 38 pages. Dell poweredge blade servers getting started guide
Also for Dell PowerEdge M610: Update Manual (44 pages), Update Manual (21 pages), Update Manual (14 pages), Installation Manual (7 pages), Getting Started Manual (12 pages), Getting Started Manual (12 pages), Technical Manual (45 pages), Portfolio Manual (27 pages), Getting Started Manual (14 pages), Getting Started Manual (12 pages)

Print Page
Dell PowerEdge M610 Information Update

System Security Screen

Option
Intel(R) TXT (Disabled
default)
New POST Messages
The following are the new POST messages for the Intel Xeon 5600 series
processors.
Message
System Memory Size:
X.X GB, System Memory
Speed: XXX MHz,
Voltage: 1.5V or 1.35V
This CPU power rating
is not supported
Non-ECC DIMM detected
on DIMM XX
Description
Enables/disables Trusted Execution Technology. To enable
TXT, enable & activate VT & TPM with pre-boot
measurement.
Description
Displays the amount of system memory, system
memory speed, and current system memory
operating voltage.
This message displays when either of the following
occurs:
• The Intel Xeon 5600 130 W series processor is
detected on an old system board (systems not marked
with roman numeral II). For a list of the supported
systems, see Important Information.
• The Intel Xeon X5677 130 W series quad-core
processor is detected on PowerEdge M610 and
M710.
Displays when the system detects a non-ECC
memory module.