Dell poweredge VRTX Getting Started Manual - Page 9
Browse online or download pdf Getting Started Manual for Switch Dell poweredge VRTX. Dell poweredge VRTX 30 pages. Server
Also for Dell poweredge VRTX: User Manual (35 pages), Release Note (5 pages), Getting Started Manual (14 pages), Quick Start & Reference Manual (2 pages), Technical Manual (45 pages), Getting Started (2 pages)
Print Page
- 1. Getting Started Guide
- 1. 1 Hardware and Initial Configuration
- 1. Switch Hardware
- 1. Initial Configuration of the Switch
- 2. Table of Contents
- 2. 2 Using the CLI
- 2. CLI Command Conventions
- 2. Accessing the Device through the CLI
- 2. Retrieving an IP Address
- 2. Security Management and Password Configuration
- 2. Configuring Login Banners
- 2. Startup Menu Procedures
- 2. Software Download
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
Table 1-4 describes the major switch defaults:
Table 1-4. Major System Defaults
Feature
SNMP
Login and Authentication
Authentication Servers
Logging
System Time
DHCP
Ports
Multicast
IGMP Snooping
Spanning Tree
VLANs
IP Addressing
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 6 / 1 3 - F O R P R O O F O N LY
Plasma\GSG\Plasma_UGHW&InitialConfiguration.fm
Defaults
Enabled.
SNMP version: V3
SNMP Local Engine ID: 0000000001
SNMP Notifications: Enabled
Telnet authentication login is from the local
user data base
HTTP authentication login is from the
local data base
HTTPS authentication login is from the
local data base
No RADIUS server is defined
No TACACS server is defined
No SYSLOG server is defined
SNTP is supported
DHCP server is disabled
DHCP auto configuration is enabled
24 GE regular ports
Full duplex is enabled.
Negotiation is enabled
Flow control is Off
No LAGs are defined
Multicast filtering is disabled
Disabled
Enabled
Default VLAN is enabled
Default VLAN ID is 1
IP address is 192.168.2.1
Hardware and Initial Configuration
9