Miele DA 2250 Operating And Installation Instructions - Page 28

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 2250. Miele DA 2250 40 pages. Cooker
Also for Miele DA 2250: Operating And Installation Manual (40 pages), User Manual (40 pages)

Print Page

Installation

Fitting the non-return flap

(not needed for recirculation mode)

^ If a non-return flap is not present in

the venting system, the non-return

flap supplied must be fitted onto the

exhaust socket in the motor unit. The

flaps must open upwards.

DA 2250, DA 2270: 1 non-return flap

DA 2210: 2 non-return flaps

Building in

The rangehood is designed for

installation in wall units, rangehood

housing units, and above breakfast

bars or island areas.

Check prior to installation that the top of

the appliance will be accessible after

installation.

If this is not the case, install the exhaust

ducting and prepare the electrical

connection before installation.

^ Place the appliance in the cut-out

from below and align it.

^ Secure the rangehood by the frame

using 3.5 x 16 mm screws.

^ Before using the appliance for the

first time, take the grease filters out

and remove the protective foil from

the filter frame. Then replace the

grease filters.