Miele DA 2390 Operating And Installation Instructions - Page 19

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 2390. Miele DA 2390 36 pages. Ventilation system
Also for Miele DA 2390: Operating And Installation Instructions (40 pages), Operating And Installation Instructions (40 pages), Operating And Installation Instructions (36 pages), Operating And Installation Instructions (40 pages), Operating And Installation Instructions (36 pages)

Miele DA 2390 Operating And Installation Instructions
Before carrying out any
maintenance or cleaning, the
rangehood must be disconnected
from the electricity supply (see
"Warning and Safety instructions").

Housing

General information
Unsuitable cleaning agents can
damage the surfaces and control
elements.
Do not use any cleaning agents
containing soda, acid, chloride, or
solvent.
Do not use any abrasive cleaning
agents, e.g. powder cleaners or
cream cleaners and abrasive
sponges, or pot scourers or sponges
which have been used previously
with abrasive cleaning agents.
Moisture in the rangehood can
cause damage.
Make sure that water does not get
into the rangehood.
 Clean all surfaces and control
elements using a small amount of
warm water and dishwashing liquid.
Apply with a soft sponge.
 After cleaning, wipe the surfaces dry
using a soft cloth.

Cleaning and care

Important information for appliances
with stainless steel surfaces
This information does not apply to the
control elements.
Stainless steel surfaces can be cleaned
with a non-abrasive cleaning agent
designed specifically for use on
stainless steel.
To prevent the surfaces from quickly
becoming dirty again, we recommend
treating them with a stainless steel care
product (available from Miele).
Important information for the control
elements
If soiling is not removed promptly, it
could cause the control elements to
alter or discolor.
Remove any soiling immediately.
The surface of the control elements
can be damaged if they are cleaned
using stainless steel cleaning agents.
Do not use stainless steel cleaning
agents on the control elements.
19