Miele DA 289 EXT Operating And Installation Instructions - Page 15

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 289 EXT. Miele DA 289 EXT 32 pages.

Print Page

Before any cleaning or maintenance

work disconnect the cooker hood

from the mains supply. Ensure that:

– it is switched off at the wall socket

and the plug removed (do not pull

on the cable, only on the plug), or

– the fuse is withdrawn from the

fused spur connection unit, or

– the mains fuse is withdrawn, or

– the screw-out fuse is removed (in

countries where this is applicable).

Housing

Warning: The surfaces and controls

are susceptible to scratches and

abrasion. Please observe the follow-

ing cleaning instructions.

E-Cloth

A microfibre "E-Cloth" is available from

the Miele UK Spare Parts Department,

Part Number 98013530, which is suit-

able for cleaning surfaces such as

stainless steel, glass, plastic and

chrome without the use of chemicals. It

can be washed 300 times.

^ All external surfaces and controls can

be cleaned using warm water with a

little washing up liquid applied with a

well wrung out soft sponge or cloth.

^ Wipe the surfaces dry using a soft cloth.

Do not use too much water when

cleaning the controls. Water could

penetrate into the electronics and

cause damage.

^ Glass surfaces can be cleaned using

a proprietary cleaning agent for glass.

Cleaning and care

Avoid:

– cleaning agents containing soda, ac-

ids or chlorides,

– abrasive cleaning agents, e.g. pow-

der cleaners or cream cleaners and

abrasive sponges, e.g. pot scourers

or sponges which have been used

previously with abrasive cleaning

agents.

These will damage the surface material.

Stainless steel surfaces

Stainless steel surfaces can be cleaned

using a proprietary non-abrasive clean-

ing agent designed specifically for use

on stainless steel.

To help prevent re-soiling, proprietary

conditioning agents for stainless steel

can also be used. Apply sparingly with

an even pressure following the direction

of the grain.

Stainless steel coloured controls

The controls may suffer discolour-

ation or damage if soiling is left on

them for too long.

Remove any soiling straight away.

Do not use stainless steel cleaning

agents on the controls.

If you are unsure about a particular

product or need further advice please

contact your nearest Miele Sales of-

fice. See back page for address.