Miele DA 3190 Operating And Installation Instructions - Page 29

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 3190. Miele DA 3190 40 pages. Ventilation system
Also for Miele DA 3190: Operating And Installation Instructions (36 pages), Operating And Installation Instructions (40 pages), Dimensions (1 pages), Operating And Installation Instructions (40 pages), Operating And Installation Instructions (40 pages), Operating And Installation Instructions (40 pages)

Print Page
Miele DA 3190 Operating And Installation Instructions
^ Remove the protective strip around
the edge of the grease filter.
Replace the grease filter.
^ To do this, pull the deflector plate out.
^ Turn the grease filter so that the
facing upwards.
^ Replace the grease filter in the front
of the deflector plate, press it
upwards and push it in together with
the deflector plate. It will slide onto
the fixing pins at the back. Finally,
push the grease filter back a little
more.
are at the front and
^ If the on-site ventilation system does
not have a
non-return flap supplied with the
appliance must be fitted in the
exhaust socket in the motor unit.
^ The appliance is set up for use with
C 150 mm ducting. If C 125 mm
ducting is required, the reducing
collar supplied must be fitted to the
exhaust socket (see section
"Connection for air extraction").
^ Secure the ventilation ducting over
the exhaust socket on the cooker
hood using a hose clip.
^ See "Connection for air extraction" for
further instructions on fitting the
ducting.
, then the
29