Miele DA 424 V EXT Operating And Installation Instructions - Page 25

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 424 V EXT. Miele DA 424 V EXT 40 pages. With extended canopy
Also for Miele DA 424 V EXT: Product Dimensions (2 pages), Operating And Installation Manual (36 pages), Operating And Installation Instructions (36 pages), Operating And Installation Instructions (36 pages), Operating And Installation Instructions (36 pages), Operating And Installation Instructions (40 pages)

Print Page
Miele DA 424 V EXT Operating And Installation Instructions
Fitting and replacing the
charcoal filter
If the cooker hood is connected for
recirculation, a charcoal filter must be
inserted in addition to the grease filters.
It is designed to absorb cooking
odours.
It is fitted in the canopy above the
grease filters.
New filters can be purchased from
your Miele Dealer / Chartered Agent
or from the Miele Spare Parts
Department.
See back cover for contact details,
and "Technical data" for the model
number of the filter.
^ Before fitting or replacing a charcoal
filter, the grease filters must first be
taken out (see previous section for
instructions on how to do this).
^ Take the charcoal filter out of its
packaging.
^ Insert the charcoal filter into the
canopy.
When fitting for the first time:
^ Set the operating hours counter to
suit your requirements (see
"Operation").
Cleaning and care
Always replace the charcoal filter im-
mediately if
– the indicator lamp for the charcoal
filter touch control lights up,
or
– if it is no longer effective in absorbing
kitchen odours.
It should, however, be replaced at least
every 6 months.
Used charcoal filters can be disposed
of with the normal household waste.
^ After fitting the new charcoal filter,
press the charcoal filter touch control
for approximately 3 seconds to re-set
the operating hours counter.
The indicator lamp will go out.
^ If a charcoal filter is replaced before
the operating hours counter has
reached its maximum, the charcoal
filter touch control should be pressed
for approximately 6 seconds to reset
the counter.
25