Miele DA 5428 W Operating And Installation Instructions - Page 17

Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DA 5428 W. Miele DA 5428 W 48 pages.

Miele DA 5428 W Operating And Installation Instructions
Selecting extraction mode or
recirculation mode
The ventilation hood can be operated
with either extraction mode or
recirculation mode. The power of the
blower is adapted to suit the selected
mode of operation. The ventilation
hood is set up at the factory for
recirculation mode. The ventilation
hood has to be reset for extraction
mode.
To reset it for extraction mode, the filter
saturation indicator for the charcoal
filter(s) has to be deactivated.
 Switch off the blower and the lighting.
 Press the  control and the
operating-hours control  at the
same time.
The charcoal filter symbol  and one of
the blower power level indicators will
flash.
 Press and hold the  control until the
B indicator starts to flash.
 Confirm the selection by pressing the
operating-hours control .
All the indicator lights will go out.
Extraction mode has now been set.
If the selection is not confirmed within
4 minutes, the system will revert to the
previous setting.

Before using for the first time

Setting up Miele@home

Requirement:
- Home WiFi network
Your ventilation hood is equipped with
an integrated WiFi module. The
ventilation hood can be connected to
the household WiFi network.
You will then be able to operate the
ventilation hood via the Miele app.
Before installing the ventilation hood
in its final location, ensure that the
signal of your WiFi network is strong
enough.
You can connect to the household WiFi
network via the Miele app or via WPS.
17