Miele DA 78 Operating Instructions Manual - Page 18

Browse online or download pdf Operating Instructions Manual for Ventilation Hood Miele DA 78. Miele DA 78 20 pages.

Print Page

Connection for air recirculation

If site conditions are not suitable for the

cooker hood to be used for air extrac-

tion, the appliance must be converted

for recirculation.

The following parts will be required:

– Conversion kit from extraction to re-

circulation (only for units or cooker

hood shafts which do not reach the

ceiling)

– Active charcoal filters

These parts are available from your

Miele Dealer or from the Miele Spare

Parts Department.

Connection –

for units or cooker hood shafts

which do not reach the ceiling

Saw out an opening in the cupboard.

From above, place the hose with the

directional grille through the hole in

the unit onto the exhaust connection

of the cooker hood so that the air out-

let points in the desired direction.

NB: on no account should it point to-

wards the wall!

Screw the directional grille to the unit

with two screws.

If there is a ceiling infill, an appropriate

cut-out in the infill must be made.

Insert the active charcoal filters (see

section "Cleaning and care").

Connection –

for cooker hood shafts which reach

the ceiling

Install a directional grille, available

from builders' merchants, in the

upper region of the chimney so that

the air outlet points in the desired di-

rection. NB: on no account should it

point towards the wall!

Attach the recirculation hose.

Insert the active charcoal filters (see

section "Cleaning and care").