Miele DAS 2620 Operating And Installation Instructions - Page 18
Browse online or download pdf Operating And Installation Instructions for Ventilation Hood Miele DAS 2620. Miele DAS 2620 36 pages.
Also for Miele DAS 2620: Operating And Installation Instructions (40 pages)
Print Page
Operation
Power management
The ventilation hood is equipped with a
power management system. Power
management helps to save energy. It
ensures that the blower power level is
reduced automatically and that the
lighting is switched off.
- If the booster level is selected, the
blower automatically switches to
level 3 after 5 minutes.
- If the blower is set to level 3, 2, or 1,
it switches back one blower setting
after 2 hours and then in 30-minute
intervals until the blower eventually
switches off.
- The overhead lighting will switch off
automatically after 12 hours.
Turning power management on/off
You can deactivate power
management.
Keep in mind that this may increase
energy consumption.
To set this option, turn off the fan and
the overhead lighting first.
Press the and buttons at the
same time for approx. 10 seconds,
until 1 lights up.
Then, press the following buttons in
succession:
- the lighting button ,
- followed by the button and then
- the lighting button .
If power management is turned on, the
1 and B indicators will be continuously
lit.
If it is turned off, the 1 and B indicators
will flash.
18
Press the button to turn power
management off.
The 1 and B indicators will flash.
To turn it on, press the button.
The 1 and B indicators will be
continuously lit.
Confirm your choice with the On/Off
button .
All the indicator lights will go out.
If the new setting is not confirmed
within 4 minutes, the ventilation system
reverts to the previous setting.
Safety shut-off
If power management has been
deactivated, the ventilation hood will
switch itself off automatically after
12 hours if it has been left on (blower
and overhead lighting).
To switch it back on, press the On/
Off control or the lighting
control .